Derestricting a 2006 derbi gpr 50

Can someone tell me where all the restrictors are as mine is stuck at 30mph? also i know it needs re-jetted

exhaust, whip the washer out with a hammer and chisel

Are there any more because ive head theres others but not too sure cuz its a new model?

im not sure, start with ripping that one out, or check in the pipe when you take it apart and that

Will do. It's just behind the end can right?

its in the end of the end can nearest the chamber I think, I aint 100% on this, anyway you wont miss it, its like a huge washer just tac welded in place

Ok thanks for that

No Problem

like dan said the restriction washer at the end of the expansion chamber needs knocking out, don't forget to re-jet!

There MIGHT also be so wire meshing inside a section of the expansion chamber, you need to grind this section out, fuck the wire meshing off and weld it back together.
As i said im not sure if they put that in the newshape.

Otherwise there are no other restrictions. The only restriction on these bikes is on the outlet (exhaust). The CDI is not restricted, jetting isn't a restriction and the airbox isn't restrictive either.

i think theres one in the airbox to mate