Project pug ped

**Will-Radford** · by **Will-Radford** on Thu Feb 25, 2010 9:08 pm

Well today i picked up a peugeot trekker wrc off my mate, 54 plate
Currently in bits but has come with brand new 70cc crank and 70cc polini piston barrel and head

Over the next few days ill be cleaning everything up ready to start putting it back together and hopefully getting it working

Bar a couple of things its basically all there.

Bad quality pics because of the darkness and shitty phone:

2 exhausts, tranny case and loads of other bits

Brand new polini 70cc top end, polini belt and some other bits

I know it doesnt look but but there alot more in other boxes, when i get it all cleaned up and its daylight ill get some better pictures and hopefully get this looking more like a project thread Very Happy

Cheers for reading, will

**Bluecollarlove** · by **Bluecollarlove** on Thu Feb 25, 2010 9:57 pm

?

I've lost track of how many bikes/peds/cars/monopeds you're going through!

How is it possible to go through so much in the space of a year? You're changing bikes/cars/wheels/tyres more often than most of us change girlfriends!

**Will-Radford** · by **Will-Radford** on Fri Feb 26, 2010 2:24 am

Its a project bike,

Picked it up for £50, everything is there bar the sick start lever haha

Just needs cleaning and assembling

Once this is running ill use this and sell my bike, use the money from my bike for a car Very Happy

**Bluecollarlove** · by **Bluecollarlove** on Fri Feb 26, 2010 8:20 pm

For £50 that's pretty good going.

With all your experience at putting things back together again - how much do you think you can get her running for?

You're not going to stop going on about that car till you get one ehh???!

**Will-Radford** · by **Will-Radford** on Sat Feb 27, 2010 12:20 am

Probly get it running nice for another £30-40 max

I need piston rings, kick start lever and i just noticed its missing a brake lever

Not bad going

**Will-Radford** · by **Will-Radford** on Sat Feb 27, 2010 12:21 am

Found a packet with new polini carbon reeds is aswell Very Happy

Layed everything out so that i can see whats there and what needs to be cleaned

This engine is meant to be a silvery grey

All dirty, but the paints all good condition

50cc piston compared to 70cc

scoooooored

**Bluecollarlove** · by **Bluecollarlove** on Sat Feb 27, 2010 12:56 am

Sweeet.

Has the weather been good where you are or something? Rolling Eyes

You've got your work cut out on that little pug ped!

**CraigB** · by **CraigB** on Sat Feb 27, 2010 4:28 pm

Why do people strip them and not bother to put ti back together? lol....

Oh, and i think iv sused my cbr problem, fucked HT lead lol. giving off a weak spark, which i think is arching, and probally blowing the others with it too.

Gotta find me some new ones, maybe some more plugs if there all fucked, and ill be good to go.

got all the carbs cleaned, the restrictors put in too. not alot else it can be really.

**Will-Radford** · by **Will-Radford** on Sat Feb 27, 2010 7:03 pm

He started it, stripped it all down. bought all the expesive engine parts and lost intrest in it haha, bargain me thinks

Little update, will ad more pics later

Look at the state of the engine,

Stripped it down and removed old crank

Got all new bearings and seals for it

Its all currently in the dish washer having a clean
(sorry mum) haha, will get pictures when i get it all out

Benneyboy · by Benneyboy on Sat Feb 27, 2010 10:07 pm

i want your fifty willy boy !!!!!!!!

**CraigB** · by **CraigB** on Sat Feb 27, 2010 11:56 pm

Will-Radford wrote:Look at the state of the engine

Hold on, im still looking, where's it hiding? Razz

hehe

Benneyboy · by Benneyboy on Sun Feb 28, 2010 11:37 am

CraigB wrote:
Will-Radford wrote:Look at the state of the engine

Hold on, im still looking, where's it hiding? hehe

lmao

**Will-Radford** · by **Will-Radford** on Sun Feb 28, 2010 12:05 pm

Ok, out of the dishwasher and come up very clean Very Happy

i think im going to spray the engine cases in high temperature black though Very Happy

Also cleaned up some varaitor and clutch bits, aswell as airbox

Carbs also clean

Sorry about the crap quality pictures

**Will-Radford** · by **Will-Radford** on Sun Feb 28, 2010 12:05 pm

Rebuilding the engine later on today, new crank, new bearings and new seals Very Happy

**Bluecollarlove** · by **Bluecollarlove** on Mon Mar 01, 2010 10:04 pm

You're kidding about putting those filthy engine parts in the dishwasher, right Will?

What's mommy going to think?!!

**Will-Radford** · by **Will-Radford** on Tue Mar 02, 2010 12:31 am

Nope i did it, mummy went mental,

Shes ok now. i cleaned out the filter inside the dishwasher and its all sparkling now, one i took the bitso ut i put another wach on with it empty to clean it all

I then put my side stand from my rs in the dishwasher last night, the side stand snapped so dads getting it welded but it needs to be clean, fook doing anything by hand now i know that badboy does the job easier

**Bluecollarlove** · by **Bluecollarlove** on Tue Mar 02, 2010 9:46 pm

Lol. Break the pug ped to fix the pug ped.....

break the dishwasher and then fix the dishwasher...

No wonder your mum went mental!

**Will-Radford** · by **Will-Radford** on Tue Mar 02, 2010 11:57 pm

haha

Right today, i ripped more off the frame so i can get a good look at the electrics to sort it all out,

sanded down exhaust, tranny cover and some panels and sprayed them up, they have come up really nice so far so im chuffed Very Happy

Pics another day

**Bluecollarlove** · by **Bluecollarlove** on Wed Mar 03, 2010 11:43 pm

sheesh. Don't you have to do your apprenticeship work?!

These days I'm working till 8pm I can barely stay awake to type at night....!

No dishwasher here. I have to wash by hand. Can just about muster the energy to whip up dinner before collapsing in bed Smile

**Will-Radford** · by **Will-Radford** on Thu Mar 04, 2010 12:18 am

Taaadaaa

Its got more of a satin black now but i still like the looks of it

From this:

To this:

Laaaaavly and smooth

Project pug ped

Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped

Re: Project pug ped